Radiographic Interpreter ASNT Level II

Certified By LEVEL III, MIGAS, APITINDO & DISNAKER

Overview

This training offers a high practical content and relevant theoretical background to enable student to achieve well understanding of the Radiographic Interpretation. This training concentrates on the identification of weld defects, assessment of radiographic quality, judgment of welding quality based on the acceptance criteria used.

Benefits

Upon successful completion of this training, participants will be able to:

  1. Well understands in radiographic theory and principle.
  2. Identify; types, size and shape of weld defect and judgment based on the code/rules/standard used.
  3. Produce acceptable report.
  4. Assessment and measurement of radiographic quality.
  5. Aware on Safety and protection of radiation
  6. Aware on QHSE Management, in spiritual manner
  7. Well Qualified and Certified beyond National & International Requirement.

Who Should Attend

  1. All personnel who require a through and comprehensive of SNT-TC-1A in radiographic interpretation of welded joint.
  2. All NDT personnel, inspector, and technicians engaged in or responsible for, inspection of welding, casting, forgings or fabricated items during manufacture or in services.

Training Modules

This Radiographic Interpreter Training Module consist of 6 modules, as follows;

1. MODULE I (QHSE Awareness with Our God Voice)

2. MODULE II (Material, Welding and NDT Defectology)

3. MODULE III (Radiographic Interpreter module for RI Level I & II Theory & Practice)

  • Introduction of NDT and General Knowledge
  • Introduction of Radiography Testing
  • Terminology, Physical Principles and Fundamentals of Radiographic.
  • Basic mathematics
  • Review on radiation protection
  • Basic principles of radiography
  • Radiographic Films
  • Film handling, loading & processing
  • Image quality indicator
  • Radiographic image quality
  • Exposure determination
  • Application technique
  • Radiographic exposure technique
  • Radiographic viewing
  • Other radiographic techniques & their application.
  • Material, processing & defects
  • Principles of welding
  • Specifications, codes, standards and procedure
  • Practice radiographic interpret

4. MODULE IV ( Safety DISNAKER )

5. MODULE V ( Safety MIGAS)

6. MODULE VI ( Examination )

 

Instructor and Examiner

  1. Mr. Sofyan T.S (EX – ABS Senior Surveyor)
  2. Mr. Etmon Hanofiar (Technical Representative at ABS Consulting In. & Aramco Inspector)
  3. Mr. Mario Andrethy (NDE Coordinator at Bechtel Corporation)
  4. Mr. Eka Yulizar (QA/QC Manager at PT. Transalindo Eka Persada)
  5. Mr. Mr. Buktirantau ( DISNAKER Batam)
  6. Mr. Novwan Nazar (HSE/Operation Engineer BP Migas/SKK Migas)
  7. Mr. A. Sivagnanam ( ASNT Level III ) or
  8. Mr. Sugianto ( ASNT Level III ) or
  9. Mr. Sajeesh Kumar Babu (ACCP / ASNT / EN 473 / ISO 9712 Level III) or
  10. Mr. Ronny Andalas (PT. Pakartek Engineering / Ikbal-M-Yos & ASNT / EN 473 / ISO 9712 / SKT Migas Level III)

Pre-requisites for attending this training

  1. Academic background ( D-III ) minimum or Bachelor degree in technique.
  2. Senior high school degree and certified ASNT Level I.
  3. Senior high school degree with minimum 3 years experience in welding, fitting & subjected to satisfactory passed of entry test
  4. Senior high school degree with minimum 3 years experience in NDT work.

Duration

  1. The training conducted in 100 hours minimum
  2. Normal training conducted on 19.00 to 23.15 WIB

Training Schedule

To be advise accordingly

Avenue

  1. Yayasan Pendidikan IKBAL-M-YOS - Main Campus Building, Garama Citra Hill Complex Block R No 3, 4, 6 & 7, Jl. Yos Soedarso, Batu Ampar, Batam. (As Examination Center/TUK registered by LSP Inspektur Maritim Indonesia - BNSP, and approved as Authorized Training Establishement/ATE by WENS QA under RTC Testing Diagnostics-UKAS Accredited providing Training & Examination for NDT Personnel Qualification in accordance with EN 473 / ISO 9712)
  2. Yayasan Pendidikan IKBAL-M-YOS - Campus II Building, Ruko Perumahan Taman Merapi Subur Block A1 No. 3, 4 & 5, Batu Aji, Batam. (As Examination Center/TUK registered by LSP Inspektur Maritim Indonesia - BNSP, and approved as Authorized Training Establishement/ATE by WENS QA under RTC Testing Diagnostics-UKAS Accredited providing Training & Examination for NDT Personnel Qualification in accordance with EN 473 / ISO 9712)

Certificate

Upon completion and pass examinations (General, Specific & Practical) in according to SNT-TC-1A requirement, the participant will be awarded Radiographic Interpreter ASNT Level II Certified by ASNT Level III, MIGAS, APITINDO and DISNAKER Batam.

Last Updated on Thursday, 27 December 2012 10:46

SCHEDULE TRAINING

MEI/JUNI 2017

DI KAMPUS I & II :

- WELDING INSPECTOR (CWII) GEL.44 & 45

- INSTRUMENT INSPECTOR (COGII) GEL.35 & 36

- COATING INSPECTOR (CMCII) Level II GEL.22 & 23

- SAFETY OFFICER (P2K3/CMSOI) GEL.25 & 26

- MT/PT ASNT LEVEL II GEL.52 & 53

- UT ASNT LEVEL II GEL.36 &37

- RI ASNT LEVEL II GEL.44 & 45

- Ahli K3 Umum Kemenaker RI Gel. 1 & 2

- First Aid Kemenaker RI Gel 2 & 3

 

NDT EN/ISO 9712 :

- Visual Testing (VT) EN/ISO 9712 Level 2 Gel.3 & 4

- Magnetic Testing (MT) EN/ISO 9712 Level 2 Gel.3 & 4

- Penetrant Testing (PT) EN/ISO 9712 Level 2 Gel.1 & 2

- Ultrasonic Testing (UT) EN/ISO 9712 Level 2 Gel.2 & 3

- Radiographic Interpreter (RI) EN/ISO 9712 Level 2 Gel.3 & 4

 

OTHER TRAINING:

- LEAD AUDITOR COURSE IRCA - ISO 9001:2015 Gel. 2 & 3

- EDDY CURRENT (ET) ASNT LEVEL II Gel. 1 & 2

- UNDERWATER VISUAL INSPECTOR (CSUVII) Gel 1 & 2

- PRESSURE VESSEL INSPECTOR (CPVII) Gel. 1 & 2

- PIPING INSPECTOR (CPPII) Gel. 1 & 2

 

PENDAFTARAN BISA DILAKUKAN DI:

1. KAMPUS UTAMA, Batu Ampar.

Silahkan Kontak: Ms. Ema / Dewi / Dessy

Telp. 0778-412757 atau 0778-413010

Email: ikbalmyos@ikbalmyos.com

SMS: +62811701435

2. KAMPUS II, Batu Aji.

Silahkan Kontak: Ms. Vita / Atika

Telp. 0778-7375437 atau 0778-7375436

Email: kampusdua@ikbalmyos.com

SMS: +6282172673535


fb twitter youtube lingin