Magnetic Particle Testing (MT) and Liquid Penetrant Testing (PT) ASNT Level II

Certified By LEVEL III, MIGAS, APITINDO & DISNAKER

Description
This training covers of two surface NDT inspection methods and offers a high practical content and relevant theoretical background to enable student to achieve well understanding of Magnetic Particle Inspection (MPI) and Liquid Penetrant Testing (LPT), qualified to operate MPI machine & LPT in order to judge the quality of welding based on the acceptance criteria used.
 

Benefits

Upon successful completion of this training, participants will be able to:

  1. Well understands in MPI & LPT theory and principle.
  2. Calibrate a MPI machine
  3. Record the accurate size and shape of defects in weld based on code/ rules/ standard will used.
  4. Produce acceptable report.
  5. Aware on QSHE Management. In spiritual Manner
  6. Well Qualified & Certified beyond the National & International Requirement.

Who Should Attend

  1. All personnel who require a through and comprehensive of SNT-TC-1A in MPI & LPT of welded joint.
  2. All NDT personnel, inspector, and technicians engaged in or responsible for, inspectionof welding, casting, forgings or fabricated items during manufacture or in services.

Training Modules

This training module divided into 6 modules, as follows:
1. MODULE I (QSHE Awareness With Our God Voice)

2. MODULE II (Material, Welding, & NDT Defectology)

3. MODULE III (Magnetic Particle Inspection & Liquid Penetrant Testing module for MT & PT Level I & II Theory & Practice)
    i. Magnetic Particle Inspection (MPI)
       - General knowledge
       - Physical principles and fundamentals of magnetic particles
       - Methods and techniques
       - Equipment and accessories
       - Code, Standard, Specification and Procedures
       - Presentation and recording of result
       - Interpretation of result, limitations
       - Practice Magnetic Testing(participants shall be wear safety shoes, mask & safety glass)
   ii. Liquid Penetrant Testing (LPT)
       - Physical principles of test Processing
       - Test equipment and materials
       - Code, Standard, Specifications and procedures
       - Recording
       - Specifications, codes, standards and procedure
       - Practice Penetrant Testing(participants shall be wear safety shoes)
4. MODULE IV (Safety MIGAS)
5. MODULE V (Safety DISNAKER)
6. MODULE VI (Examination)

Instructor and Examiner

  1. Mr. Sofyan T.S (EX – ABS Senior Surveyor / Ikbal-M-Yos)
  2. Mr. Buktirantau ( DISNAKER Batam )
  3. Mr. Novwan Nazar (HSE/Operation Engineer BP Migas/SKK Migas)
  4. Mr. Etmon Hanofiar (Technical Representative at ABS Consulting In. & Aramco Inspector)
  5. Mr. Jimmy Nadeak (Senior QA/QC at Austin Engineering)
  6. Mr. Nis Daniel (QA/QC Engineer and Lead Welding Inspector at GE Oil & Gas)
  7. Mr. Suleman (QA Manager at PT. Servotech Indonesia)
  8. Mr. Doni Afrizal (QA/QC Engineer at GlobalTech System Engineering (S) Pte Ltd.
  9. Mr. Eko Julianto (Welding and NDT Inspector at PT. Pakartek Engineering)
  10. Mr. A. Sivagnanam (ASNT Level III) or
  11. Mr. Sugianto (ASNT Level III) or
  12. Mr. Bonie Fajri Amril (ASNT Level III) or
  13. Mr. Sajeesh Kumar Babu (ACCP/ ASNT / EN 473 / ISO 9712 Level III)
  14. Mr. Ronny Andalas (PT. Pakartek Engineering / Ikbal-M-Yos & ASNT / EN 473 / ISO 9712 / SKT Migas Level III)

Pre-requisites for attending this training

  1. Academic background ( D-III ) minimum or Bachelor degree in technique.
  2. Senior high school degree freshgraduated
     

Duration

  1. The training conducted in 160 hours minimum
  2. Normal training conducted at 19.00 to 23.15 WIB.
     

Schedule Training

To be advise accordingly
 

Avenue

  1. Yayasan Pendidikan IKBAL-M-YOS - Main Campus Building, Garama Citra Hill Complex Block R No 3, 4, 6 & 7, Jl. Yos Soedarso, Batu Ampar, Batam. (As Examination Center/TUK registered by LSP Inspektur Maritim Indonesia - BNSP, and approved as Authorized Training Establishement/ATE by WENS QA under RTC Testing Diagnostics-UKAS Accredited providing Training & Examination for NDT Personnel Qualification in accordance with EN 473 / ISO 9712)
  2. Yayasan Pendidikan IKBAL-M-YOS - Campus II Building, Ruko Perumahan Taman Merapi Subur Block A1 No. 3, 4 & 5, Batu Aji, Batam. (As Examination Center/TUK registered by LSP Inspektur Maritim Indonesia - BNSP, and approved as Authorized Training Establishement/ATE by WENS QA under RTC Testing Diagnostics-UKAS Accredited providing Training & Examination for NDT Personnel Qualification in accordance with EN 473 / ISO 9712)

Certificate
Upon completion and pass examinations (General, Specific & Practical) in according to SNT-TC-1A requirement, the participant will be awarded two certificates; Magnetic Particle Inspection (MPI or MT) and Liquid Penetrant Testing (LPT or PT) ASNT Level II Certified by ASNT Level III, MIGAS, APITINDO and DISNAKER Batam.

 

Last Updated on Thursday, 27 December 2012 10:41

Belajar Ilmu-NYA disini..di Ikbal-M-Yos

Dan Kerja adalah konsekuensi-NYA

Bersama Kami Menjadi..
SDM BERDAYA SAING UNGGUL GLOBAL


START TRAINING SELANJUTNYA :

Januari (Minggu ke-1) 2015 - di Kampus II

1. Welding Inspector (CWII) Gel.37

2. Radiographic Interpreter (RI) ASNT Level II Gel.37

3. Coating Inspector (CMCII) Level II Gel.18

4. Ultrasonic Testing (UT) ASNT Level II Gel.31

5. Safety Officer (CMSOI) / P2K3 Gel.18

SEGERA Daftarkan Diri Anda..


February / March 2015 - di Kampus I

1. Welding Inspector (CWII) Gel.38

2. Radiographic Interpreter (RI) ASNT Level II Gel.38

3. Coating Inspector (CMCII) Level II Gel.19

4. Ultrasonic Testing (UT) ASNT Level II Gel.32

5. Instrument Inspector (COGII) Gel.27

6. Safety Officer (CMSOI) / P2K3 Gel.19

7. Magnetic Testing & Penetrant Testing (MT/PT) ASNT Level II Gel.43

banner-training-program-year-2014
fb twitter youtube lingin