Oil and Gas Industries Instrument Inspector (COGII)

INSTRUMENT INSPECTOR
Certified By DISNAKER, APITINDO & MIGAS

Overview
Instrumentation is one of mandatory essential key tools for monitoring of productivities, qualities and safety operation of industries, especially in maritime, oil and gas industries, fabrication operation and testing. Instrument inspector is become one of the principal means for optimalization the achievement of the quality standard requirements

Benefits
Upon successful completion of this training, participants will be able to: Understanding of review the related instrumentation drawing including P&ID, Selection Material as Required, Fabrication Support, Install Support, Install Tubing Tray, Install Tubing and Instrument Air Sub Header, Install Hook-Up Instrument, Calibration and Function Test Instrument, Testing Tubing, Hook up Valve Actuator, Instrument Mechanical Completion, testing & certification and participant also will awared what our role in our existences.

Who Should Attend
All personnel who responsibilities are in making decision, exercising of judgment concerning operations in the following shipbuilding / ship repair and construction, oil and gas, offshore fabrication, pressure vessel, boiler, railway, services and maintenance.

Modules
Instrument inspector training module consists of 16 chapters, as follows:

1. QSHE Awareness With Our God Voice

2. Material, Welding, and NDT Defectology

3. Safety Disnaker

4. Safety Migas

5. Oil & Gas Instrumentation Inspection :

  • Electrical & Instrument Document
  • Material Selection
  • Installation
  • Instrument Controller
  • Piping & Instrument Diagram (Learning)
  • Fire & Gas Detection and ESD (Emergency Shutdown)
  • Telecommunication
  • Calibrate and Function Test Instrument
  • System Completion
  • Hazardous Location
  • Basic & Regulation Inspection
  • Attachment

6. Oil & Gas Electrical Construction Installation, Testing & Inspection


Instructor and Examiner

  1. Mr. Sofyan T.S (EX – ABS Senior Surveyor / Ikbal-M-Yos)
  2. Mr. Buktirantau (DISNAKER Batam)
  3. Mr. Novwan Nazar (HSE/Operation Engineer BP Migas/SKK Migas)
  4. Mr. Agung Purnomo Saputro (Executive Engineer at MMHE, Malaysia)
  5. Mr. Pandhu Arief Lakshana (Sr. Engineer at ABS Consulting, Singapore)
  6. Mr. Syahrul Mubarok (Electrical & Instrument Inspector/Engineer at PT. McDermott Indonesia)
  7. Mr. Ardi Soma (Electrical & Instrument Inspector/Engineer at PT. Thome Offshore Management Ltd)
  8. Mr. Zulmihayanto (QA/QC Electrical & Instrument Inspector)
  9. Mr. Marthen Luther Pongmasangka (E/I & T – Inspector MPL EPC-2 ExxonMobil)


Minimum Entry Requirement

  1. Academic background ( D-III ) minimum or Bachelor degree in technique.
  2. Senior high school degree with minimum 3 years as Inspector / Supervisor in electrical & instrument.
  3. Senior high school degree with minimum 5 years experience in welding, fitting & subjected to satisfactory passed of entry test.


Duration

  • This training conducted in 100 hours minimum
  • Normal training conducted at 19.00 to 23.15 WIB.

Training Schedule
To be advised accordingly

Avenue

  1. Yayasan Pendidikan IKBAL-M-YOS - Main Campus Building, Garama Citra Hill Complex Block R No 3, 4, 6 & 7, Jl. Yos Soedarso, Batu Ampar, Batam.
  2. Yayasan Pendidikan IKBAL-M-YOS - Campus II Building, Ruko Perumahan Taman Merapi Subur Block A1 No. 3, 4 & 5, Batu Aji, Batam.


Certificate
Upon completion and passed examinations, the participant will be awarded Instrument Inspector Certified by MIGAS, APITINDO, and DISNAKER Batam.

Belajar Ilmu-NYA disini..di Ikbal-M-Yos

Dan Kerja adalah konsekuensi-NYA


Bersama Kami menjadi 
SDM BERDAYA SAING UNGGUL GLOBAL


SEGERA DAFTARKAN DIRI ANDA...

PEMBUKAAN PROGRAM TRAINING SELANJUTNYA:

Start Training Juli/Agustus 2014
Di Kampus I – Batu Ampar :

1. Safety Officer (CMSOI) Gel.17

2. Coating Inspector (CMCII) Level II Gel.18

3. Magnetic Testing & Penetrant Testing (MT/PT) ASNT Level II Gel.40

4. Ultrasonic Testing (UT) ASNT Level II Gel.30

5. Radiographic Interpreter (RI) ASNT Level II Gel.35

6. Instrument Inspector (COGII) Gel.26

7. Welding Inspector (CWII) Gel.36

SEGERA Daftarkan Diri Anda..


"International trainning Hazardouse Location and Equipment Protection" dari UL University USA.

Hari / Tanggal   : Menunggu Konfirmasi Pihak UL (Sekitar Agustus 2014)
Waktu             : 08.00 - 17.00 WIB
Tempat            : Kampus II Ikbal-M-Yos @Batu Aji

Kuota              : Minimum 35 Peserta professional.

Nara Sumber : Bp Adam Susanto, salah satu orang indonesia yang bekerja di UL USA

Biaya pendaftaran : Rp. 500.000 dan biaya trainning Rp. 6.000.000

BURUAN DAFTAR KARENA QUOTA TERBATAS.

PENDAFTARAN AKAN DI TUTUP PADA 3 MINGGU SEBELUM HARI "H" TRAINNING DI MULAI.

Selain itu kita juga memberikan ' FREE OF CHARGE untuk Mahasiswa sebanyak max 10 orang  "
syarat untuk mahasiswa :

1.  Khusus Dari universitas seluruh indonesia baik negeri maupun swasta ( D3, D4 atau SI)

2.  Surat rekomendasi dari masing masing kampus ( ASLI) yang menyatakan masih aktif kuliah

3.  Pure Mahasiswa ( bukan mahasiswa Extention)

4.  Dari jurusan Teknik

5.  Foto copy KTM yang masih berlaku 1 lembar

6.  Ketika trainning memakai jas almamater dari masing masing kampus.

banner-training-program-year-2014
fb twitter youtube lingin